Vulcan is built with the best: Quality materials and proven technology make Vulcan a great choice.
Vulcan is tough: The Vulcan storage cylinder is made from high strength steel tough enough to withstand varying water and heating cycle pressures.
Vulcan is adaptable: The balanced flue and steel jackets make Vulcan gas models easy to install and easy to live with. They can be installed on an approved base against a wall or recessed into a wall cavity.
Vulcan has backup: If you need a spare part for your Vulcan it’s good to know they are readily available across the country and can be serviced by most plumbers or electricians.
Manufactures Warranty: 5 years on cylinder. 3 year labour on cylinder. 1 year on parts and labour. Conditions apply.
Replacement hot water units are to be same or similar (i.e.your existing 170L gas/electric hot water unit is replaced with new 170L hot water unit and sited in the same position). The existing hot water unit must be in compliance with current relevant standards and by-laws. The cost does not include the supply or installation of isolation valve, cold relief or tempering valve if required. The price includes an Electrician to disconnect and reconnect the electrical supply, but any further electrical works will be extra. Note: all extra cost will be agreed before starting work.
Our Customers Say
John was prompt, reliable and efficient in repairing our plumbing issue. I will definitely call on him next time I have plumbing issues.
John is an excellent plumber. We had a new bathroom suite installed and it looks great. Much cheaper than a bathroom company and a very professional and efficient service. He also supplied beautiful taps which I had seen on the website. It is great that you can see the prices as well.
Anita A Carramar
A new toilet cistern installed and taps in ensuite reseated and complete washer change in taps and shower.
John was very fast at finding a leaking pipe. I was extremely happy with the time it took him to make the repairs. He was very professional and friendly. I would strongly recommend him to family and friends.
Lyn A Banksia Grove
Fitted a new gas bottle regulator for the property and upgraded the security standards to meet current practice.
Approximate cost: $323
Bob J from Guilderton
Hot water unit stopped working. Called John at Plumb it right he came out straight away fixed hot water unit with no hassles very pleasant to deal with. Great quality service at a good price !
Conor L in Woodvale
John installed a new tap outside. We were very impressed with his quality of work and efficiency. He has also in the past assisted me with problems I've experienced with my hot water system. Got it sorted in no time.
Dishwasher removed and repositioned into an awkward space. Water filter refitted to another room and a filtered wall mounted water urn removed and refitted to another location.
Approximate cost: $814
Sue B from Sorrento
Thanks to John from Plumb It Right who came out at short notice and replaced our hot water system and made time to repair a leaking toilet while there, thanks again
Roland A Joondalup
Needed a gas line disconnected and capped and water heater inspected. I called John and he couldn't have been more helpful. We arranged a time and day and he was on time and provided a very thorough and friendly service. Would not hesitate to use again...
Steve T Mindarie
John came to the house with short notice and fixed two leaking toilets and changed over some tap-ware. Very friendly and professional.
Installation of 2 new 'back to wall' toilets, and a flick mixer tap in the kitchen. John was on time, and gave some good advice about a couple of components. When changing out the old flick mixer and installing the new flick mixer, he even installed some cut-off taps into the lines, without being asked. His work was of a very good standard, and he is a pleasant guy to deal with.