Thanks to John from Plumb It Right who came out at short notice and replaced our hot water system and made time to repair a leaking toilet while there, thanks again
Approximate cost:$1800.00
November 2014
Roland A Joondalup

NO CALLOUT FEE
NO HOURLY RATES
FREE QUOTES

• 340 Storage Sizes (Litres)
• 315 Rated Size (Litres)
• 3.81 Heat Output (kW)
• 0.84 Power Input (kW) (1)
• 4.53 COP of Heating (1)
• 58°C Water Temp Setting
• 60°C Maximum Tank Temp Setting
• Rotary Compressor
• R290 Refrigerant
• 220-240V/50Hz/1Ph Electrical Supply (1)
• 10 Amps Circuit
• 3/4”BSP - 20mm Water Connections
• 1,000kPa PT R Valve Setting
• 850kPa Expansion Ctrl Valve (ECV) Setting
• 500-600kPa / 350-500kPa PLV (without ECV fitted / with ECV fitted)
• 48dBa Operating Sound Level at 1.5M
• 2200mm x 650mm Dimensions (Height x Diameter)
• 170kg Nett (Empty) Weight
• -10°C to +40°C Ambient Air Operating Temperature
• 75 (4.53) Hot Water Production Rate L/hr (COP)
Supplied and Installed. Call for Best Price
Terms & Conditions
Replacement hot water units are to be same or similar (i.e.your existing 170L gas/electric hot water unit is replaced with new 170L hot water unit and sited in the same position). The existing hot water unit must be in compliance with current relevant standards and by-laws. The cost does not include the supply or installation of isolation valve, cold relief or tempering valve if required. The price includes an Electrician to disconnect and reconnect the electrical supply, but any further electrical works will be extra. Note: all extra cost will be agreed before starting work.
![]()
Phone: (08) 9577 2786
Email: info@plumbitright.com.au
Postal: 151 Darch Trail, Perth, 6041